Specifications

ROOF CONSTRUCTION & INSULATION

Roof Construction 180*58*1.5 U framed, 45mm of EPS insulated sandwind panel (rain waters are taken out by inside of corner post.
DOOR JOINERIES External door (1, 2 mm galvanized metal sheet frame) 935/1981 mm Insulated steel sheet doors (outer size).
0.5 mm film covered COIL COATING system RAL9002 painted Galvanized Sheets, both sides are EPS filled, wing wide 45 mm
Internal door (1, 2 mm galvanized metal sheet frame) 840/1960 mm Mdf-lam Pressed door (outer dimensions)
Door for Wet areas (1, 2 mm galvanized metal sheet frame) 620×1960 mm Mdf-lam Pressed door (outer dimensions)
Door Lock and Handle External door locks are cylindirical, internal doors have encased locks. Brandmark ITO or KALE, yellow or grey coloured metal door handles.
WINDOW JOINERIES (FLY SCREEN ARE INCLUDED) Window 1.2 mm galvanized metal sheet) 970/1200 mm PVC Framed Windows
Kitchen WC Shower 120 mm circled electrical aspirator
  Double Glass (Glazing) 4+9+4 mm – Brand: SISECAM
PAINT External door and window frames Prepainted with COIL COATING SYSTEM
Internal Door Frames Prepainted with COIL COATING SYSTEM
Outer Corner 1 layer rapid primer + 1 layer semi-synthetic oilt paint
Other metal parts (base plate(chassis), bearing construction) 1 layer rapid Primer
SANITARY INSTALLATION ON PLASTER Lavatory /w ashbasin 37×45 cm Wall Type
Lavatory and shower taps Taps are wall mounted in cold water installation lavatories and taps have outlets from lavatories in hot water installation lavatories
Water Closet Western Style Water Closet, Plastic Flushing cistern
WC taps
Shower Tray 80×80 cm Acyrilic
Kitchen Sink Chromium-plated 50/100 cm double, lower chipboard cupboard. Top cupboard above the cupboard is not included.
Accessories PVC paper holder, soap dish, mirror, shelf, closet cover
Technical Specifications for Portatech Demountable Container
specifications Location AUSTRALIA
Company  
Product PortaTech DEMOUNTABLE PORTABLE OFFICE
production type Modular Construction with special formed and furnace painted galvanized metal sheet body.
TYPE: Rated Dimension: 2.40×6.00×2.60 m.
Outer Clear Size: 2.460×5.930×2.60 m.
All materials certificated by TSE.
 
technical datas Snow Load 80 kg/m²
Wind Speed 102 km/saat
External Wall Heat Transmission Coefficient K: 0.26 Kcal/m²hC
Internal Wall Heat Transmission Coefficient K: 0.26 Kcal/m²hC
Roof Heat Transmission Coefficient K: 0.68 Kcal/m²hC
Floor Heat Transmission Coefficient K: 3.85 Kcal/m²hC
Base-Plate (chassis) Load Capacity 200 kg/m² Calculated in accordance with T.S 498
external walls External Wall Height 2600 mm
Internal Clear Height 2320 mm
Outer Surface Covering 50 mm thickness of PortaTech Thermal Performance Panels
Outer Surface Covering: 0.45 mm thick of RAL 9002 coil painted galvanized sheets
Insulation in between: 45 mm thickness of Polistren foam (16 kg/m3)
Inner Surface Covering: 0.45 mm thick of RAL 9002 coil painted galvanized sheets
internal walls Internal Wall Height 2320 mm
Internal Wall Panel 50 mm thickness of PortaTech Thermal Performace Panels
Fibercement
Insulation in between: 45 mm thickness of Polistren foam (16kg/m3)
Inner surface covering: 0.45 mm thick of RAL 9002 coil painted galvanized sheets
floor covering Construction 100*58/50 U/C 1.50 / 2.0 mm Galvanized DX51+Z C/U sectioned cold formed profiles
Covering PVC Roll as floor covering on the 16mm thick FIBER Cement board-Hekimboard brandmarked (non-combustible) DIN 4102-2A1 Class
ceiling covering Covering 0.45 mm thickness of RAL 9002 painted galvanized sheets
Electrical Complies with Australian Standards
lifting system The loading and unloading facility shall be made by connecting the steel ropes lying in the same interval to the iron. Lifting eyes mounted hiddenly on the corners, to the lockers. If required the containers shall be two or multi-storied. The transport system of all containers will be organized by concerning that specification. WC, Shower containers will be produced with insulation or without any insulation.